A) STEEL PRESS PLATES FOR CCL, PCB, FPC PLANT(CCL 廠/PCB 廠/FPC 廠之壓合鋼板製作)
1. MATERIAL:SUS 301FH / SUS 420
2. SIZE:DEPANDS ON REQUIREMENTS
3. THICKNESS:1.0mm, 1.2mm, 1.5mm, 1.6mm,1.8mm, 2.0mm
4. ROUGHNESS OF SURFACE:WITHIN Ra 0.20
μm
5. THICKNESS ACCURANCE:WITHIN 30μm
6. HARDNESS:HRC 43-47


B) SPCIAL HARD-COATING TO STRANGTHEN HARDNESS OF THE SURFACE:﹝鋼板表面電化再生處理﹞

* SIZE:DEPANDS ON REQUIREMENTS
* THICKNESS:1.0mm, 1.2mm, 1.5mm, 1.6mm, 1.8mm, 2.0mm
* HARDNESS:HV1200~1500(HRC 75-85)
* NO EPOXY ADHERED ON THE PLATE SURFACE
* NO RUSTING, NO DEFORM FOR LONG
 
STEEL ALLOY CARRIER & TOP PLATE ﹝承載盤&上蓋板製作﹞

1. MATERIAL:HIGH ABRASIVE-RESISTANCE ALLOY STEEL
2. SIZE:DEPANDS ON REQUIREMENTS
3. THICKNESS:3mm, 4mm, 6mm, 8mm, 10mm…….
4. PARALLELISM:2mm / M
5. ROUGHNESS OF SURFACE:WITHIN Ra 1.2~2.2
μm
6. THICKNESS ACURANCE: WITHIN 50
μm
 

CCL、PCB、FPC- ALUMINUM ALLOY PRESS PLATES

﹝CCL 廠/ PCB廠/ FPC 廠之鋁合金板製作﹞

1. MATERIAL:6061T6
2. SIZE:DEPANDS ON REQUIREMENTS
3. THICKNESS:1.0mm, 1.2mm, 1.6mm, 2.0mm……..
4. HARDNESS:HRC60+
5. ABRASION-RESISTANCE:<0.095
6. ELECTRIC-RESISTANCE:OVER 1500 VDC
7. ROUGHNESS:< Ra 0.12
μm
8. INSULATION & LUBRICATION FINISHED
9. ACCURANCE:WITHIN 40
μm

ALUMINUM ALLOY CARRIER & TOP PLATE

﹝特殊鋁合金材料之承載盤&上蓋板之製作﹞


1. MATERIAL:6061T6
2. SIZE:DEPANDS ON REQUIREMENTS
3. THICKNESS:6mm, 8mm, 10mm
4. PARALLELISM:2mm / M
5. ROUGHNESS OF SURFACE:WITHIN Ra 1.2~2.2
μm
6. THICKNESS ACCURANCE:WITHIN 50
μm

 

 
   
 
Copyright (C) Sulistron Enterprise Ltd. All Rights Reserved. Design by GTUT, 愛客滿, 愛型錄, B2BManufactures
本站关键字:壓合鋼板-承載盤-研磨機器 本公司主要产品: 壓合鋼板承載盤研磨機器壓合鋼板-壓合鋼板製作研磨機